Posts & Bi-Arms

Sort By:  
  • Strain Posts [106-071A] ()
    Strain Posts:- Corner or Intermediate Wall and Ground
    Posts. Typically 50mm (2 inches) Pipes are used to anchor
    Strain Insulators. Post are Hot-Dip Galvanised or Painted.
    Wall Top Posts 1.1 Metres to 1.5 Metres in length. Groundup
    posts 2.2 Metres to 2.6 Metres long. New preferred
    post 63mm(2.5 Inch-outer Dia.) "B" Class GI Water Pipe
    with two holes at the bottom to push perpendicular 1/4inch
    steel anchor rods to imbedd in Concrete. Mounting of
    strain insulators is efficiently achieved using Elsonic's
    specially designed adjustable-position clamps that require
    no holes or welds on the Galvanised pipes (otherwise
    conventional posts with multiple mounting holes are prone
    to rusting and could also weaken the post). Stone Pillars 9
    inches by 4 or 5 Inches (cross-section) or concrete Posts 4
    inches by 6 inches (cross-section) can also be used.
    However clamp mounting on steel posts is a faster
    installation process. # (*)
    Add to Cart
    $740.00
  • Projecting Arm for Tubular Strain Posts [106-071Y] ()
    Projecting Arm for Tubular Strain Posts. Mounted with
    integral bolt and fixed with nut for Elsonic's Patented Bi-
    Arm Elephant Fence and Patented Multiple-Arm Security
    Fence.(without Moisture Cap) # (*)
    Add to Cart
    $5.42
  • Stays [106-071S] ()
    Stays:- To support and hold more firmly the Corner or
    Intermediate Wall and Ground Posts. Typically 25mm (1
    inch) Pipes are used for the Stays and are painted or
    galvanised For wall-top applications the stays are 1.1
    Metres to 1.5 Metres in length. For ground-up posts the
    stays are 2.2 Metres to 2.6 Metres long. One end flattened
    19 mm (3/4th. inch) or 25mm (1 inch) "B" Class GI Water
    pipes may be used with holes at each end and fixed in
    concrete with a cross-bar inserted into the bottom end
    (prior to embedding in concrete)and the top flattened-end
    fixed with an 'O' Clamp to the Strain Post.# (*)
    Add to Cart
    $8.15
  • Support Posts [106-071B] ()
    Support Posts:- Intermediate 'T" Angle Wall and Ground
    Posts. Typically 25 mm x 25 mm Steel 'T' Section used to
    hold Reel Insulators. Posts Hot-Dip Galvanised or Painted.
    Wall Top posts 1.1 Metres to 1.5 Metres in length. Groundup
    posts 2.2 Metres to 2.6 Metres long. New preferred post
    19mm (3/4th. Inch outer dia.) or 25mm (1 inch outer Dia.)
    "B" Class, GI Water Pipes with one hole at the bottom to
    push perpendicular anchor rod to imbedd in Concrete.
    Mounting of reel insulators efficiently done with Elsonic's
    patented pinch clamps without the need for holes or welds
    on posts (otherwise conventional post with multiple
    mounting holes prone to rusting & become weak due to the
    holes made in them).Concrete Posts (6 inches by 4 inches
    cross-section) with hooks or Stone Posts (9inches by 4 or
    5 inches cross-section) are also used. GI posts with
    Elsonic's proprietary clamps make work easy as the pinchclamps
    can be fixed on Steel Angles or Pipes rapidly &
    insulators pushed in with ease.# (*).
    Add to Cart
    $5.97
  • Projecting Arm for 'T' Angle Support Posts [106-071Z] ()
    Projecting Arm for 'T' Angle Support Posts. Mounted with
    integral clamps on T-Angles or Pipes for Elsonic's Patented
    Bi-Arm Elephant Fence or Multi-Arm Security Fence.# (*)
    Add to Cart
    $325.00
  • Strain Post Moisture Caps [106-071Z1] ()
    Strain Post Moisture Caps. Plastic caps to be
    placed or pasted on the vertically mounted fence
    tubular posts to prevent moisture or rain from entering
    the pipes.#
    Add to Cart
    $0.40
  • Support Post Moisture Caps [106-071Z2] ()
    Support Post Moisture Caps. Plastic caps to be
    placed or pasted on the vertically mounted fence
    tubular posts to prevent moisture or rain from entering
    the pipes. #
    Add to Cart
    $0.37
Per Page      1 - 7 of 7

Powered by Abantecart eCommerce Solution